Skip to content
Ships within 3 business days · Square or Stripe checkout
Golf Cup Lights

Putting Green Lighting Layout Ideas

Quick answer

A good putting green lighting layout puts an illuminated cup at each practice hole, places any perimeter lights outside the green aimed across the surface, keeps every fixture out of the golfer's line and eyes, and routes wiring along the edge or under the base to a single low-voltage transformer location.

Sketch the green first

  1. Draw the green outline and mark each cup location.
  2. Mark where you usually stand and the common putting lines.
  3. Mark the outdoor outlet and a protected spot for the transformer.
  4. Draw wiring routes that avoid crossing the putting surface where possible.

Cup placement

Spread cups so you can practice different lengths and breaks. Avoid placing a cup at the lowest point of the green, where water collects. One golf cup light kit per cup keeps each hole independently lit.

Perimeter light placement

  • Place fixtures just outside the green edge, not in fringe you walk on.
  • Aim across the green from the sides rather than from behind the golfer.
  • Use shielded fixtures so the light source is not visible from the putting stance.

Wiring

Keep runs tidy and protected, and leave a service loop at each fixture.

Safety: follow the fixture manufacturer's instructions, call 811 before digging, and have low-voltage wiring connections made by a qualified person where local code requires it.

Light your backyard green.

Cup, LED fixture, wiring, drainage hardware, flagstick and flag in one kit. Packages of 1, 3, 4 or 6.

See the LED Golf Cup Light Kit

Related guides

General information only. Always follow the instructions supplied with your products and local codes.